TUPELO HONEY #28

Accumulated debris was observed in the ice scoop bin for the ice machine. 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.

(a) Equipment, Food-Contact Surfaces, and Utensils.

1. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Pf. Note: Ice bin was immediately taken to the dish machine to be wash, rinse and sanitized during the inspection.

Cream cheese was observed in the walk in cooler with no date mark. Cream cheese is not exempt from date marking. 511-6-1.04(6)(g) - Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking (Pf) (g) Ready-to-Eat Time/Temperature Control for Safety Food, Date Marking

1. Except when packaging food using a reduced oxygen packaging method, and except as specified in paragraphs 5 and 6 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days. The day of preparation shall be counted as Day 1. Pf Note: Cream chese was immediately date marked during the inspection. According to the Manager it had been opened less than 7 days.

Facility did not display the most current inspection report on the wall in the Facility.
511-6-1.02(1)(d) - Displaying of the Inspection Report (C)

1. The most current inspection report shall be prominently displayed in public view at all times, within fifteen feet of the front or primary public door and between five feet and seven feet from the floor and in an area where it can be read at a distance of one foot away. Note: Manager displayed the most current report on the wall.

Raw shelled eggs were observed cold holding in a top open prep unit at 52 Degrees Fahrenheit. 511-6-1.04(6)(f) - Time/Temperature Control for Safety; Cold Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P Note: Raw Eggs were voluntarily discarded during the inspection.

soup was observed hot holding in a warmer cabinet at 126 Degrees Fahrenheit. 511-6-1.04(6)(f) - Time/Temperature Control for Safety; Hot Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P Soup was immediately reheated to 165 Degrees Within 2 hours during the inspection.

Two employees were observed preparing food with beards longer than one half inch. 511-6-1.03(5)(i) - Hair Restraints (C) (i) Hair Restraints.

1. Employees preparing or handling food shall use effective and clean, disposable or easily cleanable nets or other hair restraints approved by the Health Authority, worn properly to restrain loose hair including beards and mustaches longer than one half inch. Note: Both employees covered their bears during the inspection.

Dish washing machine observed not working according to manufacturer's recommendation. Technician from Auto-Chloro systems was observed in the facility trying to repair the dish machine in the kitchen, but he could not get the machine to operate according to code. Repair the dish machine, compliance will be monitored in 72 hours time.