Columbus, Muscogee County

COUNTRY'S ON BROAD

1329 BROADWAY COLUMBUS, GA 31901

Food
Latest score
96
Mar 5, 2026
City
Columbus
County
Muscogee
Inspections
5

Score history

Inspection scores over time for this facility.

Inspection history

Georgia inspection history is score-based, with violations grouped under each recorded inspection.

Mar 5, 2026

Routine

Score: 961 violation

18 - insects, rodents, and animals not present

Regulation: 511-6-1.07(5)(k) - controlling pests (pf, c)

3 ptsCorrected: NoRepeat: Yes

Observed live pest in warewashing area as well as dry storage area. The presence of insects, rodents, and other pests shall be controlled to minimize their presence on the premises by:

  1. Routinely inspecting incoming shipments of food and supplies;
  2. Routinely inspecting the premises for evidence of pests;
  3. Using methods, if pests are found, such as trapping devices or other means of pest control as specified under subsections (6)(e), (6)(m), and (6)(n) of this Rule; and
  4. Eliminating harborage conditions. Priority foundation items must be corrected within 10 calendar days.

Jun 24, 2025

Routine

Score: 823 violations

6-1A - proper cold holding temperatures

Regulation: 511-6-1.04(6)(f) - time/temperature control for safety; cold holding (p)

9 ptsCorrected: YesRepeat: No

Observed several time/ temperature control for safety foods stored in prep top coolers above 41°F. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2. of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. Person in charge discarded food items.

4-2B - food-contact surfaces: cleaned & sanitized

Regulation: 511-6-1.05(7)(b) - food contact surfaces and utensils - cleaning frequency (p, c)

4 ptsCorrected: YesRepeat: Yes

Observed black residue on chute of bulk-producing ice machine located in main kitchen area. In equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment: (I) At a frequency specified by the manufacturer; or (II) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. Person in charge cleaned ice chute of both ice machines.

18 - insects, rodents, and animals not present

Regulation: 511-6-1.07(5)(k) - controlling pests (pf, c)

3 ptsCorrected: NoRepeat: No

Observed live pest on stairwell near bathrooms. The presence of insects, rodents, and other pests shall be controlled to minimize their presence on the premises by:

  1. Routinely inspecting incoming shipments of food and supplies;
  2. Routinely inspecting the premises for evidence of pests;
  3. Using methods, if pests are found, such as trapping devices or other means of pest control as specified under subsections (6)(e), (6)(m), and (6)(n) of this Rule; and
  4. Eliminating harborage conditions. Priority foundation items must be corrected within 10 calendar days of inspection.

Dec 27, 2024

Routine

Score: 952 violations

4-2B - food-contact surfaces: cleaned & sanitized

Regulation: 511-6-1.05(7)(b) - food contact surfaces and utensils - cleaning frequency (p, c)

4 ptsCorrected: YesRepeat: No

Observed brown residue on chute of both bulk-producing ice machines located in main kitchen area. In equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment: (I) At a frequency specified by the manufacturer; or (II) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. Person in charge cleaned ice chute of both ice machines.

15B - warewashing facilities: installed, maintained, used; test strips

Regulation: 511-6-1.05(3)(h),(i),(j) - temperature measuring device, manual warewashing; sanitizing solutions, testing device (pf)

1 ptsCorrected: NoRepeat: No

Observed facility with expired temperature test strips for hot water mechanical warewashing machine. In hot water mechanical warewashing operations, an irreversible registering temperature indicator shall be provided and readily accessible for measuring the utensil surface temperature. Priority foundation item must be corrected 10 calendar days after the inspection.

May 9, 2024

Routine

Score: 852 violations

6-1B - proper hot holding temperatures

Regulation: 511-6-1.04(6)(f) - time/temperature control for safety; hot holding (p)

9 ptsCorrected: YesRepeat: No

Observed several time/temperature control for safety foods hot holding above 135°F in warmer cabinet and heat lamp. See temperature observations. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2. of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. Person in charge discarded food items.

6-2 - proper date marking and disposition

Regulation: 511-6-1.04(6)(g) - ready-to-eat time/temperature control for safety food, date marking (pf)

4 ptsCorrected: YesRepeat: Yes

Observed several food items that were prepped and held longer than 24 hours lacking any date marking stickers. Except when packaging food using a reduced oxygen packaging method, and except as specified in paragraphs 4 and 5 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days. The person in charge added dates to all the food items missing date marking stickers.

Aug 31, 2023

Routine

Score: 906 violations

4-2B - food-contact surfaces: cleaned & sanitized

Regulation: 511-6-1.05(7)(b) - food contact surfaces and utensils - cleaning frequency (p, c)

4 ptsCorrected: NoRepeat: No

Observed pink and black residue on the ice chute of the bulk-producing ice machine. Except when dry cleaning methods are used as specified under subsection (7)(e) of this Rule, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned:

(i) At any time when contamination may have occurred;

(ii) At least every 24 hours for iced tea dispensers including nozzles and consumer self-service utensils such as tongs, scoops, or ladles;

(iii) Before restocking consumer self-service equipment and utensils such as condiment dispensers and display containers; and

(iv) In equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment:

(I) At a frequency specified by the manufacturer; or

(II) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold.

Must correct within 72 hours.

4-2B - food-contact surfaces: cleaned & sanitized

Regulation: 511-6-1.05(7)(a)1 - equipment, food-contact surfaces,& utensils (pf)

4 ptsCorrected: NoRepeat: No

Observed sticker remnants left on clean food containers in the warewashing area stored on top of the rack. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Must correct within 10 calendar days.

6-2 - proper date marking and disposition

Regulation: 511-6-1.04(6)(g) - ready-to-eat time/temperature control for safety food, date marking (pf)

4 ptsCorrected: YesRepeat: No

Observed several food items that were cooked, prepped, and held longer than 24 hours with only prep dates and without discard dates. Except when packaging food using a reduced oxygen packaging method, and except as specified in paragraphs 4 and 5 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days. The day of preparation shall be counted as Day 1. The PIC had food employees add discard dates to the food items.

6-2 - proper date marking and disposition

Regulation: 511-6-1.04(6)(h) - ready-to-eat time/temperature control for safety food, disposition (p)

4 ptsCorrected: YesRepeat: No

Observed potato salad with a prep date of August 21, 2023 held longer than the allotted seven day discard date. 1. A food that requires datemarking shall be discarded if it:

(i) Exceeds 7 days, not including the time that the product is frozen; P

(ii) Is in a container or package that does not bear a date or day; P or

(iii) Is appropriately marked with a date or day that exceeds 7 days . P

  1. Refrigerated, ready-to-eat, time / temperature control for safety food prepared in a food service establishment and dispensed through a vending machine with an automatic shutoff control shall be discarded if it exceeds 7 days. P

The PIC discarded the food items.

14B - utensils, equipment and linens: properly stored, dried, handled

Regulation: 511-6-1.05(10)(a) - equipment & utensils, air-drying required (c)

1 ptsCorrected: NoRepeat: No

Observed several food containers stacked on top of each other still wet in the warewashing area on top of the rack. After cleaning and sanitizing, equipment and utensils:

  1. Shall be air-dried or used after adequate draining before contact with food; and

  2. May not be cloth dried except that utensils that have been air-dried may be polished with cloths that are maintained clean and dry.

Must correct within 72 hours.

17D - adequate ventilation and lighting; designated areas used

Regulation: 511-6-1.07(4)(b) - designated areas for employee activity, located to prevent contamination of food, equipment, utensils, linens, & single service articles (c)

1 ptsCorrected: YesRepeat: No

Observed several food employees' jackets and personal belongings stored on the rack in the main kitchen area that holds canned goods.

  1. Areas designated for employees to eat, drink, and use tobacco shall be located so that food, equipment, linens, and single-service and single-use articles are protected from contamination.

  2. Lockers or other suitable facilities shall be located in a designated room or area where contamination of food, equipment, utensils, linens and single-service and single-use articles cannot occur.

The PIC removed items and placed them in a designated area.