Sandy Springs, Fulton County

Avail Sandy Springs

760 MT. VERNON ATLANTA, GA 30328

Pool
Latest score
100
May 21, 2026
City
Sandy Springs
County
Fulton
Inspections
2

Score history

Inspection scores over time for this facility.

Inspection history

Georgia inspection history is score-based, with violations grouped under each recorded inspection.

May 21, 2026

Permit/Opening

Score: 1000 violations
No violations recorded for this inspection.

Sep 11, 2025

Permit/Opening

Score: 754 violations

6 - proper disinfectant level

Regulation: .17((1)(c) - proper disinfectant level

15 ptsCorrected: NoRepeat: No

Chlorine observed at 12. Free Chlorine level in pools using cyanuric acid or a stabilized chlorine product; Minimum 2.0 Ideal 2.0-5.0 Maximum 10.0. C/A Lower chlorine level to normal range.

7 - ph between 7.2 and 7.8

Regulation: 511-3-5-.17(2) - (2) chemical values: ph

15 ptsCorrected: NoRepeat: No

PH above 7.8. Chemical Values: pH 7.2 7.4-7.6 7.8. C/A: Lower Ph level to normal range 7.2-7.8

19 - adequate turnover rate

5 ptsCorrected: NoRepeat: No

Flow meter stuck cannot calculate turn over.

28 - flow meter: appropriate range and location

Regulation: 511-3-5-.07(4)(b) - (b) a flow meter measuring the rate of flow through the filter system with an appropriate range readable in gallons per minute (gpm) and accurate within ten percent actual flow shall be provided. the flow indicator shall be capable of measuring from

5 ptsCorrected: NoRepeat: No

Observed flow meter stuck. A flow meter measuring the rate of flow through the filter system with an appropriate range readable in gallons per minute (GPM) and accurate within ten percent actual flow shall be provided. The flow indicator shall be capable of measuring from one-half to at least one and one-half times the design flow rate. The gauge shall be located after the filtering equipment and in such location on the return line, so as to measure the total amount of water returning to the pool according to the manufacturer’s installation specifications. C/A: Replace flow meter.